(ASTM C-1059 Type II and waterproofing agents)
KEM BOND AR has an excellent bonding cementitious mixes.
As a bonding agent for new to old concrete and old to old concrete.
Mixed with OPC at a ratio 1:1 by weight, covers 40-45 sq. ft. depending upon porosity of surface.
(ASTM C-1059 Type II)
KEM BOND SBR is styrene butadiene rubber based dispersion for improving adhesion and strength of all types of commonly used mortars for restoration jobs.
Structural repairs
Mixed with cement and sand at a ratio 1:5:15 by weight.
(ASTM C-881 Type II, V grade II class B4 C.)
KEM BOND EP 1 is a specially formulated non - shrink, solvent free epoxy resin based system blended with fine inert fillers. It is supplied as a two component material in pre weighed quantities ready for on site mixing and use.
It is primarily intended as a bonder for old concrete to new freshly laid concrete and cementitious repair products.
Normally 2.5 to 3.5 m /kg depending on surface profile
(ASTM C - 881 Type II, V grade II class B4 C.)
KEM BOND EP 2 is a specially formulated epoxy resin based system blended with fine Inert fillers. It is supplied as a two component material in pre-weighed quantities ready for on-site mixing and use.
Intended as a bonder for old concrete to new freshly laid concrete.
Normally 2.5 to 3.5 m /kg depending on surface profile
(ASTM C - 881 Type I, VI, VII grade III, class B4 C.)
KEM GELL EP is a thixotropic two component epoxy based adhesive bond to variety of surfaces. It is supplied in gel like consistency which is easy to mix and apply. Base and hardner components and coloured different for ease of mixing.
It is designed for use as a surface sealant for crack injection systems. It is also used as bonding agent for common construction materials including cement boards, glass, wood and some plastics. It is also recommended for filling blowholes and minor surface irregularities prior to application of gap epoxy resin based coating systems.
2.850 litres / 3 kg pack.
