(Conforming to ASTM C 309 Type II Class A) KEM Cure Aid 10 W is wax emulsion based curing agent to avoid fast drying of concrete surfaces exposed to atmospheric conditions.
Canal surfaces. Bridge decks. Building slabs and columns.
150 / 200 gm / m depending on 2 spraying conditions and climatic situations.
(ASTM C 309 Type I D Class B)
KEM CURE 10 S is a non-degrading, membrane forming liquid based on resin suitable for spray application to freshly poured concrete. It is available as a silver color liquid. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks.
As a more effective and economical alternative to hessian and water polythene curing regimes. Suitable for use on all concrete surfaces and pavement concrete works. Recommended for:
It is not recommended for application when subsequent renders, toppings or coatings are to be applied within the degradation time unless it is removed by cleaning if insufficient time has elapsed to achieve full degradation.
The recommended rate of application is 4.5-5.5 square metres / litre.
(ASTM C – 309, Type II, Class B BS – 7542.)
KEM CURE AID 10 (EM & EB) is used on pavement concrete construction in order to avoid fast drying of the surface, which is exposed to atmospheric conditions.
KEM CURE AID 10 (EM & EB) is a water based Dispersion of Aluminum pigment in resin emulsion. On application it forms a thin film which delays the concrete drying during the curing process and avoids the formation of early shrinkage cracks.
As a concrete curing agent for airport runways, road pavements, bridge decks and all kinds of precast concrete elements
The consumption of KEM CURE AID 10 (EM & EB) (EM & EB) is approximately 150 - 200 gm/m². In case of heavy winds or higher temperature, a consumption of 250 - 300 gm/m² is recommended.
(Conforming to ASTM C 309 Type II and BS 7542) KEM CURE AID 10RWP are aluminum flake dispersed resin base curing compound.
Pavement concrete. Airport runways. Pre-cast concrete elements.
150 250 gm / m depending on 2 - spraying conditions and climatic situations.
